94
Commissioning
8.8.1.1
WBM User Administration
To allow settings to be made only by a select number of users, limit access to
WBM functions through User Administration.
Change passwords
Default passwords are documented in these instructions and therefore do not
offer adequate protection! Change the passwords to meet your particular needs.
If you do not change these passwords, a warning will appear each time you call
up a website after logging in.
Figure 17: Password Reminder
Table 46:User Settings in the Default State
Users
admin
user
guest
General Rights of WBM Users
The WBM users "admin" and "user" have rights beyond the WBM to configure the
system and install software.
User administration for controller applications is configured separately.
Access to the WBM pages is as follows:
Table 47: Access Rights for WBM Pages
Tab/Navigation
Information
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
Permissions
All (administrator)
Supported to a limited extent
Display only
WBM Page Title
WAGO I/O System Compact
751-9301 Compact Controller 100
Default Password
wago
user
---
User