Explanation Of The Table Headings In The Object Descriptions; Identity (01 ); Hex; 750-352/040-000 Fc Ethernet G3 Xtr - WAGO -I/O-SYSTEM 750 XTR Manual

192 Fieldbus Communication
72

hex

73
hex
74
hex
80
hex
81
hex
Pos : 96.3 /Serie 750 (WAGO-I/O-SYST EM)/F unktions beschr eibung/Fel dbus kommuni kati on/EtherNetIP/Erläuterung z ur Objektbes chr., Kl ass en Identi ty, M ess age Router @ 3\mod_1233730204656_21.doc x @ 27053 @ 444 @ 1
11.3.5.3

Explanation of the Table Headings in the Object Descriptions

Table 168: Explanation of the table headings in the object descriptions

Table heading
Attribute ID
Access
NV
Name
Data type
Description
Default value
11.3.5.4 Identity (01
The "Identity" class provides general information about the fieldbus
coupler/controller that clearly identifies it.
Manual
Version 1.3.0
Description
Integer value which is assigned to the corresponded attribute
Set:
The attribute can be accessed by means of Set_Attribute services.
Response also possible with Get_Attribute service!
All the set attributes can also be accessed by means of
Get_Attribute services.
Get:
The attribute can be accessed by means of Get_Attribute services.
Get_Attribute_All:
Delivers content of all attributes.
Set_Attribute_Single:
Modifies an attribute value.
Reset:
Performs a restart.
0: Restart
1: Restart and restoration of factory settings
NV (non volatile):
The attribute is permanently stored in the controller.
V (volatile):
The attribute is not permanently stored in the controller.
Without specifying, the attribute is not saved!
If this column is missing, all attributes have the type V
(volatile).
Designation of the attribute
Designation of the CIP data type of the attribute
Short description for the Attribute
Factory settings
)
hex
WAGO-I/O-SYSTEM 750 XTR

750-352/040-000 FC ETHERNET G3 XTR

Discrete Output Point Extended 3
Analog Input Point Extended 3
Analog Output Point Extended 3
Module Configuration
Module Configuration Extended 1