Ip Igmp Query-Max-Response-Time; Ip Igmp Robustness - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

15.5.6 ip igmp query-max-response-time

This command configures the maximum response time interval for the specified interface,
which is the maximum query response time advertised in IGMPv2 queries on this
interface.The time interval is specified in tenths of a second. The range for
<
maxresptime>
Default
Format
Mode
15.5.6.1 no ip igmp query-max-response-time
This command resets the maximum response time interval for the specified interface,
which is the maximum query response time advertised in IGMPv2 queries on this
interface to the default value. The maximum response time interval is reset to the default
time.
Format
Mode

15.5.7 ip igmp robustness

This command configures the robustness that allows tuning of the interface. The
robustness is the tuning for the expected packet loss on a subnet. If a subnet is expected to
have a lot of loss, the Robustness variable may be increased for the interface. The range
for <
robustness>
Default
Format
Mode
15.5.7.1 no ip igmp robustness
This command sets the robustness value to default.
Format
Mode
IP Multicast Commands
is 0 to 255 tenths of a second.
100
ip igmp query-max-response-time <seconds>
Interface Config
no ip igmp query-max-response-time
Interface Config
is 1 to 255.
2
ip igmp robustness <robustness>
Interface Config
no ip igmp robustness
Interface Config
v1.0, December 2005
15-31