Bgp Flapdamping Timerresolution; Bgp Interval Minasorigin - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
14.8.16.1 no bgp flapdamping suppresslimit
This command configures the default suppress limit of the route flaps.
Format
Mode

14.8.17 bgp flapdamping timerresolution

This command configures the delta time used in flap damping. The range for this field is 1
to 65535
.
Default
Format
Mode
14.8.17.1 no bgp flapdamping timerresolution
This command configures the default delta time used in flap damping.
Format
Mode

14.8.18 bgp interval minasorigin

This command sets the time interval in seconds for the Minimum AS origination
interval The range for this field is 1 to 32767 seconds
.
Default
Format
Mode
14.8.18.1 no bgp interval minasorigin
This command sets the time interval to the default value for the Minimum AS origination
interval
.
Format
Mode
Routing Commands
no bgp flapdamping suppresslimit
Router BGP Config
2
bgp flapdamping timerresolution <resolution>
Router BGP Config
no bgp flapdamping timerresolution
Router BGP Config
15
bgp interval minasorigin <1-32767>
Router BGP Config
no bgp interval minasorigin
Router BGP Config
v1.0, December 2005
.
14-73