Show Policy-Map Interface; Show Service-Policy - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual
Prosafe 7300 series layer-3 switches, software version 4.0
Hide thumbs
Also See for ProSafe GSM7324:
- Reference manual (263 pages) ,
- Installation manual (26 pages) ,
- Brochure & specs (2 pages)
Table of Contents
Advertisement
Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Direction
OperStatus
Policy Name
13.6.6 show policy-map interface
This command displays policy-oriented statistics information for the specified interface
and direction. The
Note: This command is only allowed while the DiffServ administrative mode is
Format
Mode
Interface
Direction
Operational
Status
Policy Name
The following information is repeated for each class instance within this policy:
Class Name
In Discarded
Packets
13.6.7 show service-policy
This command displays a summary of policy-oriented statistics information for all
interfaces in the specified direction.
Format
Mode
Quality of Service (QoS) Commands
The traffic direction of this interface service.
The current operational status of this DiffServ service inter-
face.
The name of the policy attached to the interface in the indi-
cated direction.
parameter specifies a valid interface for the system.
<slot/port>
enabled.
show policy-map interface <slot/port> [in]
Privileged EXEC
Valid slot and port number separated by forward slashes.
The traffic direction of this interface service.
The current operational status of this DiffServ service inter-
face.
The name of the policy attached to the interface in the indi-
cated direction.
The name of this class instance.
A count of the packets discarded for this class instance for
any reason due to DiffServ treatment of the traffic class.
show service-policy in
Privileged EXEC
v1.0, December 2005
13-27
Advertisement
Chapters
Table of Contents
