Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
14.8.14 bgp flapdamping reuselimit
This command configures the reuse limit of the flapped route. The range for this field is 1
to 65535
.
Default
Format
Mode
14.8.14.1 no bgp flapdamping reuselimit
This command configures the default reuse limit of the flapped route.
Format
Mode
14.8.15 bgp flapdamping reusemaxsize
This command configures the maximum reuse array size. The range for this field is 1 to
65535
.
Default
Format
Mode
14.8.15.1 no bgp flapdamping reusemaxsize
This command configures the default reuse array size.
Format
Mode
14.8.16 bgp flapdamping suppresslimit
This command configures the damping suppress limit of the route flaps. The range for this
field is 1 to 65535
Default
Format
Mode
14-72
2
bgp flapdamping reuselimit <limit>
Router BGP Config
no bgp flapdamping reuselimit
Router BGP Config
1024
bgp flapdamping reusemaxsize <size>
Router BGP Config
no bgp flapdamping reusemaxsize
Router BGP Config
.
600
bgp flapdamping suppresslimit <limit>
Router BGP Config
v1.0, December 2005
Routing Commands