Ip Irdp Preference; Show Ip Irdp - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
14.3.5.1 no ip irdp minadvertinterval
This command sets the default minimum time to the default.
Format
Mode

14.3.6 ip irdp preference

This command configures the preferability of the address as a default router address,
relative to other router addresses on the same subnet. The range is -2147483648 to -1 to 0
to 1 to 2147483647.
Default
Format
Mode
14.3.6.1 no ip irdp preference
This command configures the default preferability of the address as a default router
address, relative to other router addresses on the same subnet.
Format
Mode

14.3.7 show ip irdp

This command displays the router discovery information for all interfaces, or a specified
interface.
Format
Modes
Interface
Ad Mode
Advertise
Address
Routing Commands
no ip irdp minadvertinterval
Interface Config
0
ip irdp preference <-2147483648-2147483647>
Interface Config
no ip irdp preference
Interface Config
show ip irdp {<slot/port> | all}
Privileged EXEC
User EXEC
Shows the
<slot/port>
Displays the advertise mode, which indicates whether router
discovery is enabled or disabled on this interface.
Displays the IP address to which the interface sends the
advertisement.
v1.0, December 2005
.
14-21