Show Ip Dvmrp Prune; Show Ip Dvmrp Route - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Next Hop
Interface
Type

15.2.9 show ip dvmrp prune

This command displays the table listing the router's upstream prune information.
Format
Modes
Group IP
Source IP
Source Mask
Expiry Time
(secs)

15.2.10 show ip dvmrp route

This command displays the multicast routing information for DVMRP.
Format
Modes
Source Address
Source Mask
Upstream
Neighbor
Interface
15-16
The interface in slot/port format for the outgoing interface for
this next hop.
The network is a LEAF or a BRANCH.
show ip dvmrp prune
Privileged EXEC
User EXEC
This field identifies the multicast Address that is pruned.
This field displays the IP Address of the source that has
pruned.
This field displays the network Mask for the prune source. It
should be all 1s or both the prune source and prune mask
must match.
This field indicates the expiry time in seconds. This is the
time remaining for this prune to age out.
show ip dvmrp route
Privileged EXEC
User EXEC
This field displays the multicast address of the source group.
This field displays the IP Mask for the source group.
This field indicates the IP Address of the neighbor which is
the source for the packets for a specified multicast address.
This field displays the interface used to receive the packets
sent by the sources.
v1.0, December 2005
IP Multicast Commands