Bgp Policy Range Address; Bgp Policy Range Between; Bgp Policy Range Equal; Bgp Policy Range Greaterthan - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

14.8.29 bgp policy range address

This command adds a network IP address to a policy
an IP address, and <
peer match.
Format
Mode

14.8.30 bgp policy range between

This command adds a range to a policy identified by <
its outer bounds <
Format
Mode

14.8.31 bgp policy range equal

This command adds a value equal-to specification to a policy identified by <
< parameter is an integer from 0 to 4294967295.
value>
Default
Format
Mode

14.8.32 bgp policy range greaterthan

This command adds a greater than range specification to a policy identified by <
The <
value>
Default
Format
Mode
Routing Commands
is a network mask. Use a mask of 255.255.255.255 for an exact
mask>
bgp policy range address <index> <peerlocalid>
<mask>
Router BGP Config
and <
minvalue> maxvalue>
bgp policy range between <index> <minvalue> <max-
value>
Router BGP Config
none
bgp policy range equal <index> <value>
Router BGP Config
parameter is an integer from 0 to 4294967295.
none
bgp policy range greaterthan <index> <value>
Router BGP Config
v1.0, December 2005
The value for <
.
The range is specified by
index>.
, which are from 1 to 4294967295.
is
peerlocalid>
The
index>.
index>.
14-79