Show Ip Vrrp Interface; Show Ip Vrrp Interface Brief - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

14.5.11 show ip vrrp interface

This command displays all configuration information and VRRP router statistics of a
virtual router configured on a specific interface.
Format
Modes
IP Address
VMAC address
Authentication
type
Priority
Advertisement
interval
Pre-Empt Mode
Administrative
Mode
State

14.5.12 show ip vrrp interface brief

This command displays information about each virtual router configured on the 7300
Series Managed Switch. This command takes no options. It displays information about
each virtual router.
Format
Modes
Interface
VRID
IP Address
Routing Commands
show ip vrrp interface <slot/port> <vrID>
Privileged EXEC
User EXEC
This field represents the configured IP Address for the Virtual
router.
Represents the VMAC address of the specified router.
Represents the authentication type for the specific virtual
router.
Represents the priority value for the specific virtual router.
Represents the advertisement interval for the specific virtual
router.
Is the preemption mode configured on the specified virtual
router.
Represents the status (Enable or Disable) of the specific
router.
Represents the state (Master/backup) of the virtual router.
show ip vrrp interface brief
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes.
Represents the router ID of the virtual router.
The virtual router IP address.
v1.0, December 2005
14-29