Class - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Format
Mode

13.4.4 class

This command creates an instance of a class definition within the specified policy for the
purpose of defining treatment of the traffic class through subsequent policy attribute
statements. The
Note: This command causes the specified policy to create a reference to the class
Note: The CLI mode is changed to Policy-Class-Map Config when this command
Format
Mode
13.4.4.1 no class
This command deletes the instance of a particular class and its defined treatment from the
specified policy.
Note: This command removes the reference to the class definition for the
Format
Mode
Quality of Service (QoS) Commands
conform-color <class-map-name>
Policy-Class-Map Config
is the name of an existing DiffServ class.
<classname>
definition.
is successfully executed.
class <classname>
Policy-Map Config
is the names of an existing DiffServ class.
<classname>
specified policy.
no class <classname>
Policy-Map Config
v1.0, December 2005
13-17