Bgp Optionalcap; Bgp Origin; Bgp Policy - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

14.8.21 bgp optionalcap

This command enables the specified capability. Optional capabilities allow a BGP4
speaker to be aware of the protocol extension capabilities of a BGP4 neighbor. By default,
all capabilities are disabled
routereflect
disabled.
Default
Format
Mode
14.8.21.1 no bgp optionalcap
This command disables the specified capability. The possible optional capabilities are
,
multiproto routereflect
Format
Mode

14.8.22 bgp origin

This command sets a value for the Origin attribute of the locally originated routes. The
possible values for
Format
Mode

14.8.23 bgp policy

This command creates a policy with an access mode of permit or deny and with the
specified index. The possible value for the <
bgpinternalout
localpreference
,
nexthop lenaspath
can add a maximum of 20 policies.
Default
Format
Mode
Routing Commands
The possible optional capabilities are
.
, ,
community confed
disabled
bgp optionalcap <option>
Router BGP Config
, ,
community
no bgp optionalcap <option>
Router BGP Config
are
<origin> igp, egp,
bgp origin <origin>
Router BGP Config
. The possible values for the <
, ,
multiexitdisc
, ,
peer atomicaggregate
none
bgp policy <index> <access> <protocol> <matchtype>
Router BGP Config
v1.0, December 2005
, and . Each capability may be enabled or
all
and
confed, all
.
and
incomplete.
> are
protocol
> are
matchtype
,
community confederationid
,
aggregatoras
,
multiproto
, and
bgpinternalin
, ,
aspath origin
,
clusternumber
, and
aggregatorid
,
. You
14-75