Redistribute - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Mode
14.7.13.1 no split-horizon
This command sets the default RIP split horizon mode.
Format
Mode

14.7.14 redistribute

This command configures RIP protocol to redistribute routes from the specified source
protocol/routers. There are five possible match options. When you submit the command
redistribute ospf match <match-type> the match-type or types specified are added to any
match types presently being redistributed. Internal routes are redistributed by default.
Default
Format for OSPF
as source
protocol
Format for other
source protocol
Mode
14.7.14.1 no redistribute
This command de-configures RIP protocol to redistribute routes from the specified source
protocol/routers.
Format
Mode
Routing Commands
Router RIP Config
no split-horizon
Router RIP Config
metric - not-configured; match - internal
redistribute ospf [metric <0-15>] [match [inter-
nal] [external 1] [external 2] [nssa-external 1]
[nssa-external-2]]
redistribute {bgp | static | connected} [metric
<0-15>]
Router RIP Config
no redistribute {ospf | bgp | static | connected}
[metric] [match [internal] [external 1] [external
2] [nssa-external 1] [nssa-external-2]]
Router RIP Config
v1.0, December 2005
14-63