Copy - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

18.2.10 copy

The command uploads and downloads files to and from the switch. You can upload
copy
and download files from a server by using TFTP, Xmodem, Ymodem, or Zmodem.
Format
Mode
Replace the
<source>
the source or destination, use one of the following values:
<url>
xmodem | ymodem | zmodem | tftp://<ipaddr>/<filepath>/<filename>
For TFTP, the
to the file, and
Table 18-1. Copy Parameters
Source
nvram:clibanner
nvram:errorlog
nvram:log
nvram:script
<scriptname>
nvram:startup-config
nvram:traplog
system:running-config
<url>
<url>
<url>
System Maintenance Commands
copy <source> <destination>
Global Config
and
<destination>
parameter is the IP address of the server,
<ipaddr>
is the name of the file you want to upload or download.
<filename>
Destination
<url>
<url>
<url>
<url>
<url>
<url>
nvram:startup-config
nvram:clibanner
nvram:script
<destfilename>
nvram:sshkeydsa
v1.0, December 2005
parameters with the options in
Description
Copies the CLI banner to a server.
Copies the error log file to a server.
Copies the log file to a server.
Copies a specified configuration
script file to a server.
Copies the startup configuration to a
server.
Copies the trap log file to a server.
Saves the running configuration to
nvram.
Downloads the CLI banner to the
system.
Downloads a configuration script file
to the system. During the download
of a configuration script, the copy
command validates the script. In
case of any error, the command lists
all the lines at the end of the
validation process and prompts you
to confirm before copying the script
file.
Downloads an SSH key file. For more
information, see
Shell (SSH) Command" on
page 3-13.
Table 18-1. For
is the path
<filepath>
Section 3.4 "Secure
18-19