Bgp Policy Action Addint - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
14.8.23.1 no bgp policy
This command deletes a policy entry.
Format
Mode

14.8.24 bgp policy action addint

This command configures an
This command is used with matchtypes that use an integer as a modifier. The possible
values for the <
,
community confederationid
< > parameter is an integer.
value
If the matchtype is community, the integer value is specified as a 32-bit number. The first
16 bits represent the AS number and the second 16 bits represent any arbitrary number.
The combination of the 2 16-bit fields comprise the 32-bit community number. For
example, a system with AS number 1 and using arbitrary number 256 might specify
community as 65792 which is equivalent to 0x00010100.
The ranges for the matchtypes are as follows:
Table 14-1. BGP Policy Matchtypes
matchtype
aspath
origin
localpreference
multiexitdisc
community
confederationid
lenaspath
atomicaggregate
aggregatoras
Format
Mode
14-76
no bgp policy <
Router BGP Config
action on the policy identified with the specified index.
add
> are
matchtype aspath
,
lenaspath
range
1 to 65535
1 to 3
1 to 65535
1 to 65535
1 to 4294967295
1 to 65535
1 to 65535
1 to 2
0 to 65535
bgp policy action addint <index> <matchtype>
<value>
Router BGP Config
v1.0, December 2005
>
index
, ,
origin localpreference
,
atomicaggregate
,
multiexitdisc
, and . The
aggregatoras
Routing Commands
,