Show Ip Igmp Interface Stats - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Source Filter
Mode
If you use the
Interface
Group
Compatibility
Mode
Source Filter
Mode
Source Hosts
Expiry Time

15.5.14 show ip igmp interface stats

This command displays the IGMP statistical information for the interface. The statistics
are only displayed when the interface is enabled for IGMP.
Format
Modes
Querier Status
Querier IP
Address
Querier Up Time
15-36
The source filter mode (Include/Exclude) for the specified
group on this interface. This is "-----" for IGMPv1 and
IGMPv2 Membership Reports.
keyword, the following fields appear:
detail
Valid unit, slot and port number separated by forward slashes.
The group compatibility mode (v1, v2 or v3) for the specified
group on this interface.
The source filter mode (Include/Exclude) for the specified
group on this interface. This is "-----" for IGMPv1 and
IGMPv2 Membership Reports.
The list of unicast source IP Addresses in the group record of
the IGMPv3 Membership Report with the specified multicast
group IP Address. This is "-----" for IGMPv1 and IGMPv2
Membership Reports.
The amount of time remaining to remove this entry before it
is aged out. This is "-----" for IGMPv1 and IGMPv2 Mem-
bership Reports.
show ip igmp interface stats <slot/port>
Privileged EXEC
User EXEC
The status of the IGMP router, whether it is running in Que-
rier mode or Non-Querier mode.
The IP Address of the IGMP Querier on the IP subnet to
which this interface is attached.
The time since the interface Querier was last changed.
v1.0, December 2005
IP Multicast Commands