Show Ip Bgp Policy Detailed; Show Ip Bgp Snpalist - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Protocol
MatchType
permit/deny

14.8.76 show ip bgp policy detailed

This command displays the details of a specified policy for the BGP4 router.
Format
Mode
Policy Index
Protocol ID
Access Mode
Match Type
For each action configured for this policy, the following is displayed:
Action Type
Match Type
Values

14.8.77 show ip bgp snpalist

This command displays the list of SNPAs (Subnet Point of Attachment) that have been
added to the BGP4 router.
Format
Mode
SNPA Address
SNPA Length
14-102
This displays the protocol that was assigned to this policy in
the policy table.
This displays the match type associated with this policy.
This indicates whether this policy entry has permit or deny
access.
show ip bgp policy detailed <index>
Privileged EXEC
This displays the index of this entry in the policy table.
This displays the protocol that was assigned to this policy in
the policy table.
This indicates whether this policy entry has permit or deny
access.
This displays the match type associated with this policy.
This indicates the type of action. Possible values are add,
modify or delete.
The match type associated with this action.
The values associated with this match.
show ip bgp snpalist
Privileged EXEC
This displays the SNPA IP Address of this entry in the table.
This displays the length of this SNPA address in the table.
v1.0, December 2005
Routing Commands