NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual page 341

This section describes the IP Multicast commands available in the 7300 Series Managed
Switch CLI.
This section contains the following topics:
• Section 15.1 "Multicast Commands" on page 15-2
• Section 15.2 "DVMRP Commands" on page 15-12
• Section 15.3 "PIM-DM Commands" on page 15-17
• Section 15.4 "PIM-SM Commands" on page 15-20
• Section 15.5 "Internet Group Message Protocol (IGMP) Commands" on page 15-29
The commands in this section are in one of two groups:
• Show commands are used to display switch settings, statistics and other information.
• Configuration Commands are used to configure features and options of the switch. For
every configuration command there is a show command that will display the
configuration setting.
IP Multicast Commands
IP Multicast Commands
v1.0, December 2005
Chapter 15
15-1