Show Ip Bgp Brief - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

14.8.65 show ip bgp brief

This command displays Border Gateway Protocol (BGP4) information and Route
Redistribution information.
Format
Mode
Admin Mode
Version
Local Identifier
Local
Autonomous
System
Propagate MED
Mode
Calculate MED
Mode
Minimum AS
Origination
Interval
Minimum Route
Advertisement
Interval
Optional
Capabilities
Supported
Route Reflector
Mode
Cluster ID
Routing Commands
show ip bgp brief
User EXEC
This displays the administrative mode of Border Gateway
Protocol (BGP4) for the system.
This displays the version of BGP4 running on the router.
The router ID of the BGP4 router.
This represents the Autonomous number of the BGP4 router.
This indicates whether the MULTI_EXIT_DISC (MED)
propagation to internal links is enabled or disabled.
This indicates whether or not to take the
MULTI_EXIT_DISC (MED) metric into account when
breaking a Phase 2 tie.
This represents the time interval in seconds for the Minimum
AS Origination Interval timer.
This represents the time interval in seconds for the Minimum
Route Advertisement Interval timer.
This lists the optional capabilities supported by the BGP4
router. Route Reflector Mode
Shows whether or not this router is configured as a route
reflector.
This represents the cluster ID of the BGP4 router.
v1.0, December 2005
14-93