Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
18.2.4 clear igmpsnooping
This command clears the tables managed by the IGMP Snooping function and attempts to
delete these entries from the Multicast Forwarding Database.
Format
Mode
18.2.5 clear pass
This command resets all user passwords to the factory defaults without powering off the
switch. You are prompted to confirm that the password reset should proceed.
Format
Mode
18.2.6 enable passwd
This command prompts you to change the Privileged EXEC password.
Format
Mode
18.2.7 clear port-channel
This command clears all port-channels (LAGs).
Format
Mode
18.2.8 clear traplog
This command clears the trap log.
Format
Mode
18.2.9 clear vlan
This command resets VLAN configuration parameters to the factory defaults.
Format
Mode
18-18
clear igmpsnooping
Privileged EXEC
clear pass
Privileged EXEC
enable passwd
User EXEC
clear port-channel
Privileged EXEC
clear traplog
Privileged EXEC
clear vlan
Privileged EXEC
v1.0, December 2005
System Maintenance Commands