Clear Bgp; Default-Information Originate (Bgp); Default-Metric (Bgp) - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
14.8.37.1 no bgp suppressmode
This command informs the BGP4 module to disable the selection of less-specific routes.
Format
Mode

14.8.38 clear bgp

This command resets the peer connection. This command should be used carefully as it
could cause route flapping and overhead. The <
the neighboring BGP4 speaker's IP address.
Default
Format
Mode

14.8.39 default-information originate (BGP)

This command is used to enable the advertisement of default routes.
Format
Mode
14.8.39.1 no default-information originate (BGP)
This command is used to disable the advertisement of default routes.
Format
Mode

14.8.40 default-metric (BGP)

This command is used to set a default for the metric of distributed routes.
Format
Mode
14.8.40.1 no default-metric (BGP)
This command is used to delete the default for the metric of distributed routes.
Format
Mode
14-82
no bgp suppressmode
Router BGP Config
neighboraddress>
none
clear bgp <neighboraddress>
Privileged EXEC
default-information originate
Router BGP Config
no default-information originate
Router BGP Config
default-metric <0-4294967295>
Router BGP Config
no default-metric
Router BGP Config
v1.0, December 2005
parameter specifies
Routing Commands