Encapsulation; Show Ip Brief - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
The minimum IP MTU is 68 bytes.The maximum IP MTU is 1500 bytes.
Default
Format
Mode
14.2.9.1 no ip mtu
This command resets the ip mtu to the default value.
Format
Mode

14.2.10 encapsulation

This command configures the link layer encapsulation type for the packet. Acceptable
values for
<encapstype>
Format
Mode
Note: Routed frames are always ethernet encapsulated when a frame is routed to

14.2.11 show ip brief

This command displays all the summary information of the IP. This command takes no
options.
Format
Modes
Default Time to
Live
Routing Mode
IP Forwarding
Mode
Routing Commands
1500 bytes
ip mtu <mtu>
Interface Config
no ip mtu <mtu>
Interface Config
are ethernet and SNAP. The default is ethernet.
encapsulation {ethernet | snap}
Interface Config
a VLAN.
show ip brief
Privileged EXEC
User EXEC
The computed TTL (Time to Live) of forwarding a packet
from
the local router to the final destination.
Shows whether the routing mode is enabled or disabled.
Shows whether forwarding of IP frames is enabled or dis-
abled. This is a configured value.
v1.0, December 2005
14-13