Bgp Flapdamping Mode; Bgp Flapdamping Penaltyinc - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
14.8.11.1 no bgp flapdamping flapmaxtime
This command configures the default flap entry lifetime.
Format
Mode

14.8.12 bgp flapdamping mode

This command enables the damping of the route flaps. Damping suppresses the
advertisement of the route close to the route source until the route becomes stable. The
possible values for this field are
Default
Format
Mode
14.8.12.1 no bgp flapdamping mode
This command disables the damping of the route flaps. Damping suppresses the
advertisement of the route close to the route source until the route becomes stable.
Format
Mode

14.8.13 bgp flapdamping penaltyinc

This command configures the route damping penalty increment. The range for this field is
1 to 65535
.
Default
Format
Mode
14.8.13.1 no bgp flapdamping penaltyinc
This command configures the default route damping penalty increment.
Format
Mode
Routing Commands
no bgp flapdamping flapmaxtime
Router BGP Config
and
enable disable.
disabled
bgp flapdamping mode
Router BGP Config
no bgp flapdamping mode
Router BGP Config
100
bgp flapdamping penaltyinc <penalty>
Router BGP Config
no bgp flapdamping penaltyinc
Router BGP Config
v1.0, December 2005
14-71