Bgp Community; Bgp Confederation Identifier - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
14.8.6.1 no bgp cluster-id
This command assigns the default cluster ID to which the router belongs.
Format
Mode

14.8.7 bgp community

This command specifies the associated community value for the route exchanges. The
community attribute values range from 0x00000000 through 0x0000FFFF and
0xFFFF0000 through 0xFFFFFFFF are reserved. The rest of the community attribute
values are encoded using an autonomous system number in the first two octets
is 1 to 65535
.
Default
Format
Mode
14.8.7.1 no bgp community
This command specifies the default associated community value for the route exchanges.
Default
Format
Mode

14.8.8 bgp confederation identifier

This command assigns the external AS number that identifies the AS confederation. The
range for this field is 1 to 65535
Default
Format
Mode
14.8.8.1 no bgp confederation identifier
This command resets the bgp confederation identifier value to its default
Default
Format
Mode
Routing Commands
no bgp cluster-id
Router BGP Config
none
bgp community <1-65535>
Router BGP Config
none
no bgp community
Router BGP Config
.
0
bgp confederation identifier <confedid>
Router BGP Config
0
no bgp confederation identifier
Router BGP Config
v1.0, December 2005
The range
.
.
14-69