Ip Vrrp Authentication; Ip Vrrp Preempt - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Mode

14.5.5 ip vrrp authentication

This command sets the authorization details value for the virtual router configured on a
specified interface. The parameter
virtual router configured on the specified interface. The parameter
only required when authorization type is simple text password. The parameter
the virtual router ID which has an integer value ranges from 1 to 255.
Default
Format
Mode
14.5.5.1 no ip vrrp authentication
This command sets the default authorization details value for the virtual router configured
on a specified interface.
Format
Mode

14.5.6 ip vrrp preempt

This command sets the preemption mode value for the virtual router configured on a
specified interface. The parameter
1 to 255
Default
Format
Mode
14.5.6.1 no ip vrrp preempt
This command sets the default preemption mode value for the virtual router configured on
a specified interface.
Format
Mode
Routing Commands
Interface Config
{none | simple}
no authorization
ip vrrp <vrID> authentication {none | simple
<key>}
Interface Config
no ip vrrp <vrID> authentication
Interface Config
is the virtual router ID, which is an integer from
<vrID>
enabled
ip vrrp <vrID> preempt
Interface Config
no ip vrrp <vrID> preempt
Interface Config
v1.0, December 2005
specifies the authorization type for
is optional, it is
[key]
is
<vrID>
14-25