Area Stub Summarylsa; Area Virtual-Link - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
14.6.13.1 no area stub
This command deletes a stub area for the specified area ID.
Format
Mode

14.6.14 area stub summarylsa

This command configures the Summary LSA mode for the stub area identified by
. The Summary LSA mode is configured as enabled.
<areaid>
Default
Format
Mode
14.6.14.1 no area stub summarylsa
This command configures the default Summary LSA mode for the stub area identified by
.
<areaid>
Format
Mode

14.6.15 area virtual-link

This command creates the OSPF virtual interface for the specified
. The
<neighbor>
Format
Mode
14.6.15.1 no area virtual-link
This command deletes the OSPF virtual interface from the given interface, identified by
and
<areaid>
Format
Mode
14-34
no area <areaid> stub
Router OSPF Config
disabled
area <areaid> stub summarylsa
Router OSPF Config
no area <areaid> stub summarylsa
Router OSPF Config
parameter is the Router ID of the neighbor.
<neighbor>
area <areaid> virtual-link <neighbor>
Router OSPF Config
. The
<neighbor> <neighbor>
no area <areaid> virtual-link <neighbor>
Router OSPF Config
v1.0, December 2005
<areaid>
parameter is the Router ID of the neighbor.
and
Routing Commands