Route-Reflect; Trapflags - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
14.8.59.1 no route-aggregation
This command disables the usage of path address aggregation.
Format
Mode

14.8.60 route-reflect

This command enables route reflection mode. If this is enabled, the BGP4 speaker will re-
advertise to other BGP4 neighbor's routes
Default
Format
Mode
14.8.60.1 no route-reflect
This command disables route reflection mode. If this is enabled, the BGP4 speaker will re-
advertise to other BGP4 neighbor's routes
Format
Mode

14.8.61 trapflags

This command enables BGP4 trap flags.
Default
Format
Mode
14.8.61.1 no trapflags
This command disables BGP4 trap flags.
Format
Mode
Routing Commands
no route-aggregation
Router BGP Config
.
disabled
route-reflect
Router BGP Config
.
no route-reflect
Router BGP Config
disabled
trapflags
Router BGP Config
no trapflags
Router BGP Config
v1.0, December 2005
14-91