NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual page 330

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
Confederation ID
Auto Restart
Mode
Default-Metric
Default Route
Advertise
Static Redistribution
Source
Metric-value
Distribute-list
RIP Redistribution
Source
Metric-value
Distribute-list
Connected Redistribution
Source
Metric-value
Distribute-list
OSPF Redistribution
Source
Metric-value
Match-value
Distribute-list
14-94
This represents the AS confederation ID to which the BGP4
router belongs.
This states whether to automatically start message sending in
the case of connection failure or not.
Default value for redistributed routes.
Indicates whether the default routes received from other
source protocols are advertised or not.
Source protocol/routes that are being redistributed.
Metric of the routes being redistributed.
The Access list used to filter redistributed routes
Source protocol/routes that are being redistributed.
Metric of the routes being redistributed.
The Access list used to filter redistributed routes
Source protocol/routes that are being redistributed.
Metric of the routes being redistributed.
The Access list used to filter redistributed routes.
Source protocol/routes that are being redistributed.
Metric of the routes being redistributed.
The criteria by which OSPF routes are redistributed into
other routing domains.
The Access list used to filter redistributed routes.
v1.0, December 2005
Routing Commands