Show Ip Ospf Interface Brief - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-
State
Designated
Router
Backup
Designated
Router
Number of Link
Events
Metric Cost

14.6.44 show ip ospf interface brief

This command displays brief information for the IFO object or virtual interface tables.
Format
Modes
Interface
OSPF Admin
Mode
OSPF Area ID
Router Priority
Hello Interval
Dead Interval
Retransmit
Interval
Transit Delay
Interval
Routing Commands
The OSPF Interface States are: down, loopback, waiting,
point-to-point, designated router, and backup designated
router.
The router ID representing the designated router.
The router ID representing the backup designated router.
The number of link events.
The cost of the OSPF interface.
show ip ospf interface brief
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes.
States whether OSPF is enabled or disabled on a router inter-
face.
Represents the OSPF Area Id for the specified interface.
A number representing the OSPF Priority for the specified
interface.
A number representing the OSPF Hello Interval for the speci-
fied interface.
A number representing the OSPF Dead Interval for the speci-
fied interface.
A number representing the OSPF Retransmit Interval for the
specified interface.
A number representing the OSPF Transit Delay for the speci-
fied interface.
v1.0, December 2005
14-51