Danfoss VLT AutomationDrive EZ FC 321 Programming Manual page 232

VLT® AutomationDrive EZ FC 321
Programming Guide
Option Name
[224] Position error
[225] Position limit
[226] Touch on target
[227] Touch activated.
Parameter 13-02 Stop Event
Table 453: Parameter 13-02 Stop Event
13-02 Stop Event
Default Value:Size related
Conversion Index: -
Select the boolean (true or false) input to deactivate smart logic control.
Option Name
[0] False
[1] True
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current limit
[7] Out of current range
[8] Below I
low
[9] Above I
high
[10] Out of speed range
[11] Below speed low
[12] Above speed high
[13] Out of feedb. range
[14] Below feedb. low
[15] Above feedb. high
[16] Thermal warning
[17] Mains out of range
[18] Reversing
[19] Warning
[20] Alarm (trip)
232 | Danfoss A/S © 2021.08
Description
Parameter Type: Option, Array [4]
Data Type: Uint8
Description
For descriptions of options [0] False–[61] Logic rule 5, see parameter 13-01 Start Event.
Parameter Descriptions
Setup: 2 set-ups
Change during operation: True
AU373327181955en-000101 / 130R1208