Danfoss VLT AutomationDrive EZ FC 321 Programming Manual page 38

VLT® AutomationDrive EZ FC 321
Programming Guide
Option Name
[0] None
[9] Performance Monitor
[15] Readout: actual setup
[37] Display Text 1
[38] Display Text 2
[39] Display Text 3
[89] Date and Time Readout
[748] PCD Feed Forward
[953] PROFIBUS Warning Word
[1005] Readout Transmit Error Counter
[1006] Readout Receive Error Counter
[1007] Readout Bus Off Counter
[1013] Warning Parameter
[1230] Warning Parameter
[1397] Alert Alarm Word
[1398] Alert Warning Word
[1399] Alert Status Word
[1472] Legacy Alarm Word
[1473] Legacy Warning Word
[1474] Leg. Ext. Status Word
[1500] Operating Hours
[1501] Running Hours
[1502] kWh Counter
[1580] Fan Running Hours
[1600] Control Word
[1601] Reference [Unit]
[1602] Reference %
[1603] Status Word
[1605] Main Actual Value [%]
[1606] Actual Position
[1607] Target Position
38 | Danfoss A/S © 2021.08
Description
No display value selected.
Present control word.
Total reference (sum of digital/analog/preset/bus/freeze reference/catch up and
slow down) in selected unit.
Total reference (sum of digital/analog/preset/bus/freeze reference/catch up and
slow down) in percent.
Present status word.
Actual value as a percentage.
Actual position in position units selected in parameter 17-70 Position Unit.
Active target position in position units selected in parameter 17-70 Position Unit.
Parameter Descriptions
AU373327181955en-000101 / 130R1208