Danfoss VLT AutomationDrive EZ FC 321 Programming Manual page 32

VLT® AutomationDrive EZ FC 321
Programming Guide
Option Name
[47] Czech
[48] Polski
[49] Russian
[50] Thai
[51] Bahasa Indonesia
Parameter 0-02 Motor Speed Unit
Table 10: Parameter 0-02 Motor Speed Unit
0-02 Motor Speed Unit
Default value: –
Conversion index: –
This parameter cannot be adjusted while the motor is running.
Changing the motor speed unit resets certain parameters to their initial value. Select the motor speed unit before modifying oth-
er parameters.
The information shown in the display depends on the settings in parameter 0-02 Motor Speed Unit and parameter 0-03 Regional Set-
tings. The default settings of parameter 0-02 Motor Speed Unit and parameter 0-03 Regional Settings depend on the region to which
the drive is supplied.
Option Name Description
[0] RPM Select to show motor speed variables and parameters using motor speed (RPM).
[1] Hz Select to show motor speed variables and parameters using output frequency (Hz).
Parameter 0-03 Regional Settings
Table 11: Parameter 0-03 Regioanl Settings
0-03 Regional Settings
Default value: –
Conversion index: –
This parameter cannot be adjusted while the motor is running.
Option Name Description
[0] International Activate parameter 1-20 Motor Power [kW] for setting the motor power in kW and set the default value of
parameter 1-23 Motor Frequency to 50 Hz.
[1] US Activate parameter 1-20 Motor Power [kW] for setting the motor power in hp and set the default value of
parameter 1-23 Motor Frequency to 60 Hz.
32 | Danfoss A/S © 2021.08
Description
Part of language package 3.
Part of language package 4.
Part of language package 3.
Part of language package 2.
Part of language package 2.
Parameter type: Option
Data type: Uint8
N O T I C E
N O T I C E
Parameter type: Option
Data type: Uint8
N O T I C E
Parameter Descriptions
Setup: 2 setups
Change during operation: False
Setup: 2 setups
Change during operation: False
AU373327181955en-000101 / 130R1208