Clock Settings - Danfoss VLT AutomationDrive EZ FC 321 Programming Manual

VLT® AutomationDrive EZ FC 321
Programming Guide
Parameter 0-68 Safety Parameter Password
Table 43: Parameter 0-68 Safety Parameters Password
0-68 Safety Parameters Password
Default value: 300
Conversion index: 0
Enter the password for the safety parameters access. If parameter 0-69 Password Protection of Safety Parameters is set to [0] Disabled,
this parameter is ignored.
Parameter 0-69 Password Protection of Safety Parameters
Table 44: Parameter 0-69 Password Protection of Safety Parameters
0-69 Password Protection of Safety Parameters
Default value: [0] Disabled
Conversion index: –
Option
[0]*
[1]

4.1.8 0-7* Clock Settings

Parameter 0-70 Date and Time
Table 45: Parameter 0-70 Date and Time
0-70 Date and Time
Default value: Size related
Conversion index: 0
Sets the date and time of the internal clock. The format to be used is set in parameter 0-71 Date Format and parameter 0-72 Time
Format. When using the VLT® Real-time Clock MCB 117 option, the time is synchronized at 15:00 every day.
Parameter 0-71 Date Format
Table 46: Parameter 0-71 Date Format
0-71 Date Format
Default value: Size related
Conversion index: –
Option
[0]
[1]
[2]
Danfoss A/S © 2021.08
Parameter type: Range [0 - 9999]
Data type: Uint16
Parameter type: Option
Data type: Uint8
Name
Disabled
Enabled
Parameter type: Range [0 - 0]
Data type: TimeOfDay
Parameter type: Option
Data type: Uint8
Name
YYYY-MM-DD
DD-MM-YY
MM/DD/YYYY
Parameter Descriptions
Setup: 1 setup
Change during operation: True
Setup: 1 setup
Change during operation: True
Description
Setup: All setups
Change during operation: True
Setup: 1 setup
Change during operation: True
Description
AU373327181955en-000101 / 130R1208 | 53