Danfoss VLT AutomationDrive EZ FC 321 Programming Manual page 308

VLT® AutomationDrive EZ FC 321
Programming Guide
View whether the logging buffer is full (see parameter group 15-1* Data Log Settings). The logging buffer is never full when parame-
ter 15-13 Logging Mode is set to [0] Log always.
Option
[0]*
[1]
Parameter 16-41 Performance Maintenance
Table 610: Parameter 16-41 Performance Maintenance
16-41 Performance Maintenance
Default Value: 0
Conversion Index: 0
Parameter 16-42 Service Log Counter
Table 611: Parameter 16-42 Service Log Counter
16-42 Service Log Counter
Default Value: 0
Conversion Index: 0
Shows the number of service logs stored in the ServiceLog file. If the ServiceLog file is full, clear the logged data by selecting option
[5] Clear service logs in parameter 14-22 Operation Mode. The logged data is deleted on the next power-up.
Parameter 16-43 Timed Actions Status
Table 612: Parameter 16-43 Timed Actions Status
16-43 Timed Actions Status
Default Value: [0] Timed actions auto
Conversion Index: -
Select the times actions view.
Option Name
[0]* Timed actions auto
[1] Timed actions disabled
[2] Constant on action
[3] Constant off actions
Parameter 16-45 Motor Phase U Current
Table 613: Parameter 16-45 Motor Phase U Current
16-45 Motor Phase U Current
Default Value: 0 A
Conversion Index: -2
Shows the motor phase U
RMS
imbalance in motor windings.
308 | Danfoss A/S © 2021.08
Name
No
Yes
Parameter Type: Range, 0 - 2147483647
Data Type: VisStr[50]
Parameter Type: Range, 0 - 2147483647
Data Type: Uint8
Parameter Type: Option
Data Type: Uint8
Parameter Type: Range, 0 - 10000 A
Data Type: Int32
current. Facilitates monitoring of imbalance in the motor currents, detection of weak motor cables or
Description
Setup: All set-ups
Change during operation: True
Setup: All set-ups
Change during operation: True
Setup: All set-ups
Change during operation: True
Description
Setup: All set-ups
Change during operation: True
AU373327181955en-000101 / 130R1208
Parameter Descriptions