Danfoss VLT AutomationDrive EZ FC 321 Programming Manual page 45

VLT® AutomationDrive EZ FC 321
Programming Guide
Parameter 0-30 Unit for User-defined Readout
Table 23: Parameter 0-30 Unit for User-defined Readout
0-30 Unit for User-defined Readout
Default value: [0] None
Conversion index: –
It is possible to program a value to be shown in the display of the LCP. The value has a linear, squared, or cubed relation to speed.
This relation depends on the unit selected (see Table 3.2). The actual calculated value can be read in parameter 16-09 Custom Read-
out, and/or shown in the display by selecting [16-09] Custom Readout in parameter 0-20 Display Line 1.1 Small to parameter 0-24 Dis-
play Line 3 Large.
Option
[0]*
[1]
[5]
[10]
[11]
[12]
[20]
[21]
[22]
[23]
[24]
[25]
[30]
[31]
[32]
[33]
[34]
[40]
[41]
[45]
[60]
[70]
[71]
[72]
[73]
Danfoss A/S © 2021.08
Parameter type: Option
Data type: Uint8
Name
None
%
PPM
1/min
rpm
Pulse/s
l/s
l/min
l/h
3
m /s
3
m /min
3
m /h
kg/s
kg/min
kg/h
t/min
t/h
m/s
m/min
m
°C
mbar
bar
Pa
kPa
Parameter Descriptions
Setup: All setups
Change during operation: True
Description
AU373327181955en-000101 / 130R1208 | 45