Danfoss VLT AutomationDrive EZ FC 321 Programming Manual page 255

VLT® AutomationDrive EZ FC 321
Programming Guide
Option Name
[40] Drive stopped
[41] Reset trip
[42] Auto-reset trip
[43] OK key
[44] Reset key
[45] Left key
[46] Right key
[47] Up key
[48] Down key
[50] Comparator 4
[51] Comparator 5
[60] Logic rule 4
[61] Logic rule 5
[70] SL time-out 3
[71] SL time-out 4
[72] SL time-out 5
[73] SL time-out 6
[74] SL time-out 7
[75] Start command given
[76] Digital input X30/2
[77] Digital input X30/3
[78] Digital input X30/4
[79] Digital input X46/1
[80] Digital input X46/3
[81] Digital input X46/5
[82] Digital input X46/7
[83] Digital input X46/9
[84] Digital input X46/11
[85] Digital input X46/13
[94] RS Flipflop 0
[95] RS Flipflop 1
[96] RS Flipflop 2
Danfoss A/S © 2021.08
Description
[OK] is pressed. Only available on the graphical LCP.
[Reset] is pressed. Only available on the graphical LCP.
[◃] is pressed. Only available on the graphical LCP.
[▹] is pressed. Only available on the graphical LCP.
[▵] is pressed. Only available on the graphical LCP.
[▿] is pressed. Only available on the graphical LCP.
Use the result of comparator 4.
Use the result of comparator 5.
Use the result of logic rule 4.
Use the result of logic rule 5.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
See parameter group 13-1* Comparators.
Parameter Descriptions
AU373327181955en-000101 / 130R1208 | 255