Relays - Danfoss VLT AutomationDrive EZ FC 321 Programming Manual

VLT® AutomationDrive EZ FC 321
Programming Guide
Option Name
[124] Running reverse
[125] Drive in hand mode
[126] Drive in auto mode
[180] Clock fault
[181] Prev. Maintenance
[188] AHF Capacitor Connect
[189] External Fan Control
[190] Safe Function active
[191] Safe Opt. Reset req.
[192] RS Flipflop 0
[193] RS Flipflop 1
[194] RS Flipflop 2
[195] RS Flipflop 3
[196] RS Flipflop 4
[197] RS Flipflop 5
[198] RS Flipflop 6
[199] RS Flipflop 7
[221] IGBT-cooling
[231] In Power Lim. Mot.
[232] In Power Lim. Gen.
[233] In Power Limit
Parameter 5-31 Terminal 29 Digital Output
Table 312: Parameter 5-31 Terminal 29 Digital Output
5-31 Terminal 29 Digital Output
Default value: Size related
Conversion index: –
The options for this parameter are the same as those listed for parameter 5-30 Terminal 27 Digital Output.

4.6.4 5-4* Relays

Parameters for configuring the timing and the output functions for the relays.
164 | Danfoss A/S © 2021.08
Parameter type: Option
Data type: Uint8
Parameter Descriptions
Description
Setup: All setups
Change during operation: True
AU373327181955en-000101 / 130R1208