Safety Instructions; Overview; Target Group And Necessary Qualifications; Safety Symbols - Danfoss VLT AutomationDrive EZ FC 321 Programming Manual

VLT® AutomationDrive EZ FC 321
Programming Guide

2 Safety Instructions

2.1 Overview

This Safety chapter only relates to programming the drive. When installing or operating the drive, refer to the Installation Guide
applicable safety instructions. To programming this product safely:
• Never program damaged units.
• Follow the instructions provided in this Programming Guide.
• Make sure that all personnel working on or with the drive have read and understood this guide and any additional product
manuals. Contact if you are unclear of the given information, or if you lack information.

2.2 Target Group and Necessary Qualifications

Correct and reliable transport, storage, installation, operation, and maintenance are required for the trouble-free and safe operation
of the drive. Only skilled personnel are allowed to perform all related activities for these tasks. Skilled personnel are defined as
properly trained staff, who are familiar with and authorized to install, commission, and maintain equipment, systems, and circuits in
accordance with pertinent laws and regulations. Also, the skilled personnel must be familiar with the instructions and safety meas-
ures described in this manual and the other product-specific manuals. If you are not a skilled electrician, do not perform any electri-
cal installation and troubleshooting activities.

2.3 Safety Symbols

The following symbols are used in this manual:
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard-related (for example, messages relating to property damage).
Danfoss A/S © 2021.08
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
Safety Instructions
AU373327181955en-000101 / 130R1208 | 15