Danfoss VLT AutomationDrive EZ FC 321 Programming Manual page 162

VLT® AutomationDrive EZ FC 321
Programming Guide
Option Name
[7] Run in range/no warn
[8] Run on ref/no warn
[9] Alarm
[10] Alarm or warning
[11] At torque limit
[12] Out of current range
[13] Below current, low
[14] Above current, high
[15] Out of speed range
[16] Below speed, low
[17] Above speed, high
[18] Out of feedb. range
[19] Below feedback, low
[20] Above feedback, high
[21] Thermal warning
[22] Ready,no thermal W
[23] Remote,ready, no TW
[24] Ready, Voltage OK
[25] Reverse
[26] Bus OK
[27] Torque limit & stop
[28] Brake, no brake war
[29] Brake ready, no fault
[30] Brake fault (IGBT)
[31] Relay 123
[32] Mech brake ctrl
[33] Safe stop active
[35] External interlock
[38] Motor feedback error
[39] Tracking error
[40] Out of ref range
[41] Below reference, low
162 | Danfoss A/S © 2021.08
Parameter Descriptions
Description
AU373327181955en-000101 / 130R1208