Configuring A Device Name
The system administrator can assign a device name to the Digi CM. This is
often helpful for administration purposes to locate a specific Digi CM on the
network. To assign the Digi CM a device name, do the following:
1. Access the web interface.
2. Under the System administration heading, choose Device name.
3. Enter the name you want to assign the Digi CM.
4. Choose Save & apply.
Adding, Editing, and Removing Users
The system administrator can add, remove, or edit user files easily from the
web interface by doing the following:
1. Access the web interface.
2. Under the System administration heading, choose Users administration.
3. Choose to Add User, Edit User, or Remove User. You can:
4. Choose Save & apply.
Chapter 12
•
Add a user: Assign a name, user group, and a password.
•
Edit user files: Change user group, password, or their shell.
•
Remove a user: Remove a user from the system.
Note:
The password for root can be changed from the command line interface only
using the command passwd.
System Administration
83