Table of Contents
Advertisement
8. Hotkey Operation
8.7 Keyboard Language
To change the keyboard language:
1. Invoke Hotkey Mode.
2. Press [F6] [nn] [Enter].
Note: nn is a two-digit number that represents the keyboard language code (US English: 33; French: 08; Japanese: 15).
8.8 Keyboard Operating Platform
The B006-VU4-1 default port configuration is for a PC-compatible keyboard operating platform. If your console uses a PC
compatible keyboard and you have a Mac attached to a port, for example, you can change the port's keyboard operating
platform configuration so that the PC compatible keyboard emulates the Mac keyboard.
The procedure is as follows:
1. Bring the KVM focus to the port you want to set.
2. Invoke Hotkey Mode.
3. Press and release the appropriate Function key (see table below). After completing this procedure, you automatically
exit Hotkey Mode.
Function Key
[F2]
[F3]
[F10]
8.9 List Switch Settings
To see a listing of the current switch settings:
1. Open a text editor or word processor and place the cursor in the page window.
2. Invoke Hotkey Mode.
3. Press and release [F4] to display the settings.
8.10 USB Reset
If the USB loses focus and needs to be reset:
1. Invoke Hotkey Mode.
2. Press and release [F5].
8.11 Hotkey Buzzer Control
The Buzzer can be hotkey toggled on and off. To toggle the buzzer:
1. Invoke Hotkey Mode.
2. Press and release [B].
Operation
Enables Mac keyboard emulation, see Mac Keyboard
section for details.
Enables Sun keyboard emulation, see Sun Keyboard
section for details.
Automatically detects and sets the keyboard operating
platform.
13
Advertisement
Table of Contents
