Port Priority; Cli Configuration; Web Configuration - Tripp Lite NGI-M08POE8-L2 Owner's Manual

6.1.1.1 Port Priority

6.1.1.1.1 CLI Configuration

Node Command
enable show interface
IFNAME
enable configure terminal
configure interface IFNAME
interface default-priority <0-7>
interface no default-priority

6.1.1.1.2 Web Configuration

Parameter
Port Priority Settings
All Ports 802.1p
priority
Port
802.1p Priority
Apply
This command displays the current port
configurations.
This command changes the node to configure node.
This command enters the interface configure node.
This command allows the user to specify a default
priority handling of untagged packets received by the
Switch. The priority value entered with this command
will be used to determine which of the hardware
priority queues the packet is forwarded to. Default: 0.
This command configures the default priority (0) for
the specific port.
Description
Use this field to set a priority for all ports.
The value indicates packet priority and is added to the priority tag
field of incoming packets. The values range from 0 (lowest priority)
to 7 (highest priority).
This field displays the number of a port.
Select a priority for packets received by the port. Only packets
without 802.1p priority tagged will be applied the priority you set
here.
Click Apply to take effect the settings.
64
Description