Table of Contents
Advertisement
Mounting and Dismounting to DIN-Rail
Power Input
Safety measures should be taken before connecting the power cable.
Turn off the power before connecting modules or wires. The correct
power supply voltage is listed on the product label. Check the voltage
of your power source to make sure you are using the correct voltage.
DO NOT use a voltage greater than what is specified on the product
label. Calculate the maximum possible current in each power wire and
common wire. Observe all electrical codes dictating the maximum current
allowable for each wire size. If current exceeds the maximum rating, the
wiring can overheat causing serious damage to your equipment.
CAUTION: The surface of the power output may be hot,
do not touch. Wear protective equipment before making
contact.
8
Advertisement
Table of Contents
