Instruments - Toyota 7FG35 Operator's Manual

INSTRUMENTS

11 2 5 6 9 10
8 1 7
Gasoline models
11 2 5 6 9 10 4 3
8 1 7
Diesel models
6
Integrated monitoring center
Meter illumination lamp is provided for easy
meter reading at night. It comes on when the
light control switch is set to ON.
1. Hour meter used also to diagnose the SAS
2. Engine oil pressure warning lamp
3. Sedimenter warning lamp (Diesel models)
4. Preheating indicator lamp
(Diesel engine models: Standard in designate
area)
5. Air cleaner cleaning warning lamp
6. Charge warning lamp
7. Water temperature gauge
8. Fuel gauge
9. SAS warning lamp (SAS models)
10. Swing lock indicator lamp (SAS models)
11. Mini lever warning lamp (Option)
Each warning lamp check method
(1) Please check if all warning lamps come on
when the ignition switch is turned to ON.
(2) If any lamp does not come on, the lamp may
be burnt out. Inspect the lamp.
Note: Use the light control switch to check the
meter-lighting lamp.
Caution
The preheating indicator lamp (Diesel engine
models) does not come on when the engine
coolant temperature exceeds 2.5°C.
Hour meter also serving as an SAS
diagnosis indicator (SAS models)
Only operates when the ignition switch is on.
It indicates the total number of vehicle operat-
ing hours.
The unit of the right most digit is 1/10 hour.
Please use this meter to grasp the timing for pe-
riodic maintenance and record the operating
hours.
SAS models
The hour-meter display will alternately indicate
an error code and an hour-meter reading in the
SAS.
Caution
Should an error code be displayed, park the
vehicle at a safe location and receive an in-
spection by a Toyota dealer.