Table of Contents
Advertisement
Setup
Power failure
R The hub will not work during a power failure.
R The hub's telephone features will not work
during a power failure. We recommend
connecting a corded-type telephone that
does not use an AC adaptor to your
telephone line.
®
Wi-Fi
settings
After you have connected your hub, here is
what you will need to do in order to access the
system from your mobile device. Each
procedure is explained in this chapter.
1
Download
Download the [Home Network] app to
your mobile device.
2
Initial setup
Use the [Home Network] app to
configure the hub to connect to your
wireless router, and then register your
mobile device to the hub.
Downloading the [Home
Network] app
Download information is available at the web
page listed below.
www.panasonic.net/pcc/support/tel/
homenetwork/
12
Compatible mobile devices
iPhone 4 or later, iPad, or iPad mini (iOS 6.0
or later) or an Android™ device (Android 4.0
or later)
Note:
R The [Home Network] app may not function
properly depending on the system
environment, such as the model of your
mobile device, peripherals connected to
your mobile device, and the apps installed
on your mobile device.
R The following Android devices are not
compatible with the [Home Network] app.
– Android devices that are not supported
by Google Play
– Android devices with limited hardware
features (Bluetooth, Wi-Fi, and
microphone support are required.)
Initial setup
Confirm the following before you begin.
– Make sure you have installed the [Home
Network] app on your mobile device
– Make sure the hub and your wireless router
are turned on and the hub's LED indicator
is lit in yellow
– Make sure the hub is located within range
of your wireless router
– Make sure your mobile device is connected
to your wireless router
– Make sure your mobile device can connect
to the Internet
– Make sure you know the network name
(SSID) and password assigned to your
wireless router
Note:
R If the hub's region setting is not set, the
hub prompts you to set it. Follow the
on-screen instructions to set up the hub.
Initial setup for iPhone, iPad
1
Start the [Home Network] app.
R If prompted, follow the on-screen
instructions and select the appropriate
region/country.
R If prompted to select the device to be
set up, tap [Hub].
Advertisement
Table of Contents
