Table of Contents
Advertisement
4.9.1. TFTP Software Upgrade
On the Switch Tools Configuration Menu, pressing "T" opens the TFTP
Software Upgrade screen, as shown in Fig. 4-9-2. On this screen, you can
upgrade the firmware version.
PN28160K Local Management System
Switch Tools Configuration -> TFTP Software Upgrade
Image Version:
TFTP Server IP:
TFTP Server IPv6:
Image File Name:
Reboot Timer:
-------------------------------- <COMMAND> -----------------------------------
Set TFTP [S]erver IP Address
Set TFTP Server [I]Pv6 Address
Set Image [F]ile Name
[U]pgrade Image
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Image Version
Shows the current firmware version.
TFTP Server IP
Shows the IP address of the TFTP server providing the firmware to be
used for update.
Image File
Shows the file name of the firmware to be upgraded.
Name
Reboot Timer
Shows the time before rebooting after downloading the firmware.
You can set the time in the System Reboot Menu.
1.0.0.xx
0.0.0.0
::
0 seconds
Fig. 4-9-2 TFTP Software Upgrade
234
Advertisement
Table of Contents
