Table of Contents
Advertisement
4.3.7.
SNTP Configuration
In this Switching Hub, it is possible to set the time accurately by synchronizing the
internal clock to an external SNTP server's clock via SNTP (Simple Network Time
Protocol).
On the Basic Switch Configuration Menu, pressing "T" opens the SNTP Configura-
tion Menu screen, as shown in Fig. 4-4. On this screen, you can configure the SNTP
settings.
PN25249 Local Management System
Basic Switch Configuration -> Time Configuration Menu
Time ( HH:MM:SS )
Date ( YYYY/MM/DD ) : xxxx/xx/xx
SNTP Server IP
SNTP Polling Interval : 1440 Min
Time Zone : (GMT+09:00) Osaka,Sapporo,Tokyo
Daylight Saving
-------------------------------- <COMMAND> -----------------------------------
Set SNTP Server I[P]
Set SNTP [I]nterval
Set Time [Z]one
S[e]t Daylight Saving
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Time(HH:MM:SS):
Date(YYYY/MM/DD):
SNTP Server IP:
SNTP Polling Interval:
Time Zone:
Daylight Saving:
: xx:xx:xx
xxxxxx
: x.x.x.x
: N/A
Fig. 4-4 SNTP Configuration Menu
Displays the time of the internal clock.
Displays the date of the internal clock.
Displays the IP address of the SNTP server that executes time synchroni-
zation.
Displays the interval of time synchronization with the SNTP server.
Displays the time zone.
Displays the application status of Daylight Saving (Summer time).
51
Advertisement
Table of Contents
