Static Arp Table - Panasonic PN28240i Operation Manual

3.1.21. Static ARP Table

Select "Basic Config" and "ARP Table" and then "Static ARP Table" to open the
screen shown in Figure 3-21. On this screen, you can manually register the relation-
ship between the IP address and the MAC address with the ARP table.
Screen Description
Add Click the "Add" button, and the information specified in the following items will be
registered with the ARP table.
IP Address
MAC Address
Remove Displays the list of the manually registered ARP entries.
Click the "Next Page" and "Previous Page" buttons, and the display range of the list
will be switched.
Select the entry to be deleted and click the "Remove" button, and it will be
removed from the ARP table.
Click the "Select All" button, and all entries will be selected.
Click the "Reset" button, and all entries will be deselected.
Figure 3-21 Static ARP Table
Enter the IP address to be added.
Enter the MAC address to be added.
44