Table of Contents
Advertisement
Installation Guide
E
N
G
L
I
S
H
37
❏ Remove the cover.
¡Remove the cover from the control unit of the head unit (CY-VMC7000U).
¡Remove Velcro tape from the bottom of the control unit of the head unit (CY-VMC7000U) if any.
q Hook the cover with your nail.
w Slide the cover and remove it.
1
Connect the control unit of the head unit (CY-VMC7000U) to this unit (CA-TU7000U).
q Slide the unit along the guides, and
insert the connector in this unit
securely.
w Make sure that the pawls on the
bottom of the control unit of the
head unit are in position.
Try to move the control unit by
pressing the topside of it as shown
with the arrow in the figure.
e Drive two Binding-Head Screws q
from the bottom of the AV control
unit to fix it.
Make sure to fix it firmly.
46
CA-TU7000U
Mounting the AV Control Unit
CY-VMC7000U
Control Unit
Cover
Connectors
(continued)
When you put the cover back
Put the cover back. Be sure to
engage the edge of the tuner unit
with the cover.
CA-TU7000U
Bottom side
Pawl
Use a magnet-type screw driver to
drive screws uprightly.
Use a screw
driver that is
suitable for the
screws.
CY-VMC7000U
Control Unit
Guide
Top side
CY-VMC7000U
Control Unit
Make sure that the unit is
mounted tightly.
Top side
q Binding-Head screw
(M3 x 6 mm)
Advertisement
Table of Contents
