Table of Contents
Advertisement
3.5.5. RADIUS Server Configuration
Configure the access settings of a RADIUS server for user login
authentication in "Global configuration mode." Confirm the configuration
information by executing the "show radius-server" command in "Privileged
mode."
Command to show the RADIUS configuration
M24eG#
Command to configure the RADIUS server access settings
M24eG(config)#
Command to set the NAS ID
M24eG(config)#
Command to delete the NAS ID
M24eG(config)#
Command to show the login method configuration
M24eG#
Command to set the login method
M24eG(config)#
show radius-server
radius-server host <index> {ip <ip-address> | ipv6 <ipv6-address>}
[timeout <sec(s)>][retransmit <retries>]
{[key <string> [encrypt]] | [encrypted-key <encrypted-string>]}
dot1x nasid <string>
no dot1x nasid
show login method
login method <index> {Local | RADIUS | None}
127
Advertisement
Table of Contents
